Shop

/Shop
  • Perfluoroelastomer(FFKM) parts resist over 1,800 different chemicals, while offeringthe high temperature stability of PTFE (327°C). FFKM use in highly aggressive chemical processing, semiconductor wafer fabrication, pharmaceutical, oil and gas recovery, and aerospace applications. The long-term, proven performance of FFKM parts can meanless frequent seal changes, repairs and inspections, increasing process and equipment up time for greater productivity and yield. Heat resistance
    • Up to 330°C (608°F)
    Cold flexibility
    •  -18°C to -26°C (0°F to -15°F)
    Chemical resistance
    • Aliphatic and aromatic hydrocarbons
    • Chlorinated hydrocarbons
    • Polar solvents
    • Inorganic and organic acids
    • Water and steam
    • High vacuum with minimal loss in weight
    Download Data Sheet
  • Telfon,Silicone and FKM Encapsulated O-Ring with FEP or PFA core of elastomer that is completely covered with a seamless sheath of FEP fluoropolymer. The elastomeric core is normally either fluorocarbon (FKM) or silicone (VMQ). They are used mainly in the chemical, petrochemical, food and pharmaceutical industries, and other sectors where high levels of chemical resistance or hygiene are required. Please contact us if you have any inquiry regarding Encapsulated O-Rings in Metric or Inch sizes. Download Data Sheet
  • A back-up ring is a rigid ring that holds an elastomeric seal to its designed shape and in its correct place. Back up rings are commonly used with O-rings, lip seal, and as reciprocating shaft seals. FKM / FKM, Nitrile / NBR, and PTFE are materials mostly used as a backup ring. For inquiry on backup ring contact us with Email: click here Download Data Sheet
  • FKM Oil Seal (Rotary Shaft Seal or Elastomer Lip Seal) is a component of machine that seals lubricants, an oil seal is constructed of rubber, garter spring, and an internal case. While preventing the leakage of lubricants, water, or chemicals, an oil seal also prevents the entry of dust and dirt into a machine. Download Data Sheet
  • Hammer Union seal are high-pressure threaded or welded connections with two halves a threaded female half and a wing male half with swivel nut that fit together and seal upon turning and then hammering the nut half together with the threaded half. Nimax can supply you best FKM Hammer Union seal in different figs like 602, 1002, 1502, 2002 and 2202.
  • Spring Energized PTFE Seals or spring Loaded Teflon Seal are ideal for those hard to seal applications. Such as high or low temperatures, high pressures, high speeds and/or extremely corrosive environments. Spring Energized Teflon Seal are also used in applications requiring very low friction special in Oil and Gas industries. Spring Energized PTFE Seals are typically used in areas where elastomeric seals cannot meet the frictional, temperature, or chemical resistance requirements of the application. Jacket materials: Virgin PTFE, Graphite filled PTFE, Carbon Filled PTFE, Rubber Elastomer Spring materials: Inconel, 301 SS, Elgiloy, 17-7 PH SS Our diverse and experienced technical staff can aid in product selection as well as product development if necessary, allowing us to be your partner not just a seal supplier.
  • Bonded Washers or Bonded Sealing Washers (Commonly known as Dowty Seals) Often used as bolt seals in hydraulic equipment, today bonded seals are finding usage in many and varied applications throughout industry. Bonded seals are based on a rectangular section metal washer with a trapezoidal shaped ring of vulcanised rubber bonded to the inside. Self Centralising Bonded Seals which have an extra lip on the ID of the rubber. This centres the seal at its location and will eliminate leaks with the added advantages of easy installation and reduced assembly time. Materials Elastomer component isavailable in NBR 70 (standard) and (special order materials) NBR 90, FKM (viton®) 70 & 75 Shore A, EPDM 75 Shore A Washer component is carbon steel,zinc/yellow zinc plated or stainless steel (on request). Download Data Sheet
  • FKM Sheet (Viton sheet) is a high performance elastomer sheet using in many industries. VITON Sheet has developed for outstanding performance in very hot and extremely corrosive environments. FKM/Viton  Sheet particularly valued for its excellent heat stability and resistance to aggressive fuels and chemicals. FKM/Viton is the most specified fluoroelastomer for fuel system seals, expansion joints and gaskets.
  • We are Supplier/Manufacturing custom molded rubber Seals and molded rubber parts for applications across many industries with material FKM/FKM.
  • NBR / Buna-N / Nitrile rubber Oring cord belongs to acrylonitrile category of elastomers. This rubber O-Rings cord offers excellent resistance to a wide range of oil, hydraulic fluids, water and alcohols as well as general purpose. NBR / Nitrile Oring cord are available in Nimax stock in wide range size 1 to 30 mm in standard shore A 70. Temperature Range -30°C to+120°C. For acid resistance and high Temp. you can use FKM cord Download Data Sheet
  • O-RINGS FKM 90 SHORE A

    0.50 AED256.70 AED
    Black Fluorocarbon O ring, also known as a FKM o-ring or VITON, FPM orings. FKM (VITON ®) O'Rings have a low compression set and have high temperature and chemical resistance with Durometer / Shore A 90 which use for high pressure. For normal pressure you can use O-Ring FKM shore 75 . The terms FPM, FKM and FKM® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material: fluoro rubber. O-Ring BS sizes Download Data Sheet
  • FKM CORD

    3.00 AED112.00 AED
    FKM-VITON rubber Orings cord belongs to fluoroelastomer/ fluorocarbon category of elastomers. This rubber O-Rings cord offers excellent resistance to a wide variety of corrosive fluids at elevated temperature without major degradation. Nimax FKM/FKM® rubber cords have excellent resistance to ozone,The terms FPM, FKM and FKM® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material: fluoro rubber. Temperature Range -15°C to+200°C. For Normal application you can use NBR Cord. Download Data Sheet
Select your currency
AED United Arab Emirates dirham