O-RINGS

Home/O-RINGS
  • Telfon,Silicone and FKM Encapsulated O-Ring with FEP or PFA core of elastomer that is completely covered with a seamless sheath of FEP fluoropolymer. The elastomeric core is normally either fluorocarbon (FKM) or silicone (VMQ). They are used mainly in the chemical, petrochemical, food and pharmaceutical industries, and other sectors where high levels of chemical resistance or hygiene are required. Please contact us if you have any inquiry regarding Encapsulated O-Rings in Metric or Inch sizes. Download Data Sheet
  • Perfluoroelastomer(FFKM) parts resist over 1,800 different chemicals, while offeringthe high temperature stability of PTFE (327°C). FFKM use in highly aggressive chemical processing, semiconductor wafer fabrication, pharmaceutical, oil and gas recovery, and aerospace applications. The long-term, proven performance of FFKM parts can meanless frequent seal changes, repairs and inspections, increasing process and equipment up time for greater productivity and yield. Heat resistance
    • Up to 330°C (608°F)
    Cold flexibility
    •  -18°C to -26°C (0°F to -15°F)
    Chemical resistance
    • Aliphatic and aromatic hydrocarbons
    • Chlorinated hydrocarbons
    • Polar solvents
    • Inorganic and organic acids
    • Water and steam
    • High vacuum with minimal loss in weight
    Download Data Sheet
  • O-RINGS FKM 75 (FKM) SHORE A

    0.40 AED229.20 AED
    Black Fluorocarbon/ Fluoroelastomer O ring, also known as a FKM o-ring or FKM, FPM orings. FKM (FKM ®) O'Rings have a low compression set and have high temperature and chemical resistance. The terms FPM, FKM and FKM® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material: fluoro rubber. Temperature Range -20°C to +200°C with Durometer/Hardness 75. For high pressure you should use FKM Shore 90. If you are looking for Green or Brown color FKM O'Rings contact us with Email: click here O-Ring BS sizes Download Data Sheet
  • O-RINGS FKM 90 SHORE A

    0.50 AED256.70 AED
    Black Fluorocarbon O ring, also known as a FKM o-ring or VITON, FPM orings. FKM (VITON ®) O'Rings have a low compression set and have high temperature and chemical resistance with Durometer / Shore A 90 which use for high pressure. For normal pressure you can use O-Ring FKM shore 75 . The terms FPM, FKM and FKM® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material: fluoro rubber. O-Ring BS sizes Download Data Sheet
  • O-Rings NBR 70 (Nitrile) Shore A

    0.15 AED34.80 AED
    Black NBR O ring, also known as a Nitrile o-ring or Buna-N O'Rings most widely used elastomer in the seal industry today. NBR is a standard material for Hydraulics and Pneumatic. NBR / Nitrile O-Rings resists oil-based hydraulic fluids, fats and oils. Temperature Range -30°C to+120°C with Durometer/Hardness 70. If you are looking for different shore A such shore 90 O-Rings please contact us with Email: click here O-Ring BS sizes Download Data Sheet
  • O-Rings NBR 90 (Nitrile) Shore A

    0.30 AED118.22 AED
    Black NBR 90 O ring, also known as a Nitrile 90 o-ring or Buna-N 90 O'Rings most widely used elastomer in the seal industry today. NBR is a standard material for Hydraulics and Pneumatic. NBR 90 / Nitrile 90 O-Rings resists oil-based hydraulic fluids, fats and oils which need to high pressure. Temperature Range -30°C to+120°C with Durometer/Hardness 90. For Harsness 70 you can check O-Ring NBR shore A 70 specification. Please send your enquiry for NBR 90 O-Ring to Email: click here O-Ring BS sizes Download Data Sheet
Go to Top