Shop

/Shop
  • Spring Energized PTFE Seals or spring Loaded Teflon Seal are ideal for those hard to seal applications. Such as high or low temperatures, high pressures, high speeds and/or extremely corrosive environments. Spring Energized Teflon Seal are also used in applications requiring very low friction special in Oil and Gas industries. Spring Energized PTFE Seals are typically used in areas where elastomeric seals cannot meet the frictional, temperature, or chemical resistance requirements of the application. Jacket materials: Virgin PTFE, Graphite filled PTFE, Carbon Filled PTFE, Rubber Elastomer Spring materials: Inconel, 301 SS, Elgiloy, 17-7 PH SS Our diverse and experienced technical staff can aid in product selection as well as product development if necessary, allowing us to be your partner not just a seal supplier.
  • Black NBR 90 O ring, also known as a Nitrile 90 o-ring or Buna-N 90 O'Rings most widely used elastomer in the seal industry today. NBR is a standard material for Hydraulics and Pneumatic. NBR 90 / Nitrile 90 O-Rings resists oil-based hydraulic fluids, fats and oils which need to high pressure. Temperature Range -30°C to+120°C with Durometer/Hardness 90. For Harsness 70 you can check O-Ring NBR shore A 70 specification. Please send your enquiry for NBR 90 O-Ring to Email: click here O-Ring BS sizes Download Data Sheet
  • Black NBR O ring, also known as a Nitrile o-ring or Buna-N O'Rings most widely used elastomer in the seal industry today. NBR is a standard material for Hydraulics and Pneumatic. NBR / Nitrile O-Rings resists oil-based hydraulic fluids, fats and oils. Temperature Range -30°C to+120°C with Durometer/Hardness 70. If you are looking for different shore A such shore 90 O-Rings please contact us with Email: click here O-Ring BS sizes Download Data Sheet
  • O-RINGS KIT

    13.70 $149.59 $
    O-Rings servicing kits in different sizes with materials NBR, FKM (FKM) in different shores A are a good choice for all industries. NBR 75, NBR 90, FKM 75 and FKM 90 o-Rings kit available in our stock. With splicing kit you make any size of O-Rings for your special purpose. We can supply any backup ring kit, PTFE Oring kit, PTFE backup ring kit, Quad seal kit and more. You can check details of each kit from download link in front of each kit.
  • O-RINGS FKM 90 SHORE A

    0.14 $70.33 $
    Black Fluorocarbon O ring, also known as a FKM o-ring or VITON, FPM orings. FKM (VITON ®) O'Rings have a low compression set and have high temperature and chemical resistance with Durometer / Shore A 90 which use for high pressure. For normal pressure you can use O-Ring FKM shore 75 . The terms FPM, FKM and FKM® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material: fluoro rubber. O-Ring BS sizes Download Data Sheet
  • O-RINGS FKM 75 (FKM) SHORE A

    0.11 $62.79 $
    Black Fluorocarbon/ Fluoroelastomer O ring, also known as a FKM o-ring or FKM, FPM orings. FKM (FKM ®) O'Rings have a low compression set and have high temperature and chemical resistance. The terms FPM, FKM and FKM® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material: fluoro rubber. Temperature Range -20°C to +200°C with Durometer/Hardness 75. For high pressure you should use FKM Shore 90. If you are looking for Green or Brown color FKM O'Rings contact us with Email: click here O-Ring BS sizes Download Data Sheet
  • O-RING MEASURING GAUGE

    10.68 $134.25 $
    For positive measurement O-Rings every time, you can use Nimax O-Ring identification gauge for accurate measurements of O-Ring I.D. Slide gauge for measuring O-Rings up to 13″ inside diameter. Measures AS568A dash series, -001-050, -102-178, -201-279, -309-382 and -425-455
  • NBR / Buna-N / Nitrile rubber Oring cord belongs to acrylonitrile category of elastomers. This rubber O-Rings cord offers excellent resistance to a wide range of oil, hydraulic fluids, water and alcohols as well as general purpose. NBR / Nitrile Oring cord are available in Nimax stock in wide range size 1 to 30 mm in standard shore A 70. Temperature Range -30°C to+120°C. For acid resistance and high Temp. you can use FKM cord Download Data Sheet
  • Hammer Union seal are high-pressure threaded or welded connections with two halves a threaded female half and a wing male half with swivel nut that fit together and seal upon turning and then hammering the nut half together with the threaded half. Nimax can supply you best FKM Hammer Union seal in different figs like 602, 1002, 1502, 2002 and 2202.
  • FKM Sheet (Viton sheet) is a high performance elastomer sheet using in many industries. VITON Sheet has developed for outstanding performance in very hot and extremely corrosive environments. FKM/Viton  Sheet particularly valued for its excellent heat stability and resistance to aggressive fuels and chemicals. FKM/Viton is the most specified fluoroelastomer for fuel system seals, expansion joints and gaskets.
  • FKM Oil Seal (Rotary Shaft Seal or Elastomer Lip Seal) is a component of machine that seals lubricants, an oil seal is constructed of rubber, garter spring, and an internal case. While preventing the leakage of lubricants, water, or chemicals, an oil seal also prevents the entry of dust and dirt into a machine. Download Data Sheet
  • FKM CORD

    0.82 $30.68 $
    FKM-VITON rubber Orings cord belongs to fluoroelastomer/ fluorocarbon category of elastomers. This rubber O-Rings cord offers excellent resistance to a wide variety of corrosive fluids at elevated temperature without major degradation. Nimax FKM/FKM® rubber cords have excellent resistance to ozone,The terms FPM, FKM and FKM® very often cause confusion and lead to incorrect interpretations. All of these designations actually stand for one single base material: fluoro rubber. Temperature Range -15°C to+200°C. For Normal application you can use NBR Cord. Download Data Sheet
Select your currency
USD United States (US) dollar