Products

4 Item(s)

per page

Set Descending Direction
  1. HAMMER UNION SEAL

    HAMMER UNION SEAL

    $0.00

    Hammer Union seal are high-pressure threaded or welded connections with two halves a threaded female half and a wing male half with swivel nut that fit together and seal upon turning and then hammering the nut half together with the threaded half. Nimax can supply you best Viton Hammer Union seal in different figs like 602, 1002, 1502, 2002 and 2202. Learn More
  2. VITON OIL SEAL

    VITON OIL SEAL

    $0.00

    Viton/FKM Oil Seal (Rotary Shaft Seal or Elastomer Lip Seal) is a component of machine that seals lubricants, an oil seal is constructed of rubber, garter spring, and an internal case. While preventing the leakage of lubricants, water, or chemicals, an oil seal also prevents the entry of dust and dirt into a machine. Learn More
  3. SPRING ENERGIZED PTFE SEALS

    SPRING ENERGIZED PTFE SEALS

    $0.00

    Spring Energized PTFE Seals or spring Loaded Teflon Seal are ideal for those hard to seal applications. Such as high or low temperatures, high pressures, high speeds and/or extremely corrosive environments. Spring Energized Teflon Seal are also used in applications requiring very low friction special in Oil and Gas industries. Spring Energized PTFE Seals are typically used in areas where elastomeric seals cannot meet the frictional, temperature, or chemical resistance requirements of the application. Jacket materials: Virgin PTFE, Graphite filled PTFE, Carbon Filled PTFE, Rubber Elastomer Spring materials: Inconel, 301 SS, Elgiloy, 17-7 PH SS Our diverse and experienced technical staff can aid in product selection as well as product development if necessary, allowing us to be your partner not just a seal supplier. Learn More
  4. BONDED SEAL

    BONDED SEAL

    $0.00

    Bonded Washers or Bonded Sealing Washers (Commonly known as Dowty Seals) Often used as bolt seals in hydraulic equipment, today bonded seals are finding usage in many and varied applications throughout industry. Bonded seals are based on a rectangular section metal washer with a trapezoidal shaped ring of vulcanised rubber bonded to the inside. Self Centralising Bonded Seals which have an extra lip on the ID of the rubber. This centres the seal at its location and will eliminate leaks with the added advantages of easy installation and reduced assembly time. Materials Elastomer component isavailable in NBR 70 (standard) and (special order materials) NBR 90, FKM (vitonĀ®) 70 & 75 Shore A, EPDM 75 Shore A Washer component is carbon steel,zinc/yellow zinc plated or stainless steel (on request). Learn More

4 Item(s)

per page

Set Descending Direction